|
Technical Specs for Perle I/O Device Servers
IOLAN SDS TD4, SDS TA4, SDS TD2R2, SDS TT4, SDS
A4R2, SDS A4D2
Main Processor
- MPC852T, 66 Mhz, 87 MIPS
- 32 MB RAM
- 8 MB Flash
I/O Processor
Network/Ethernet
- 1 x 10/100Mb RJ45
- 1.5 KV magnetic isolation
I/O Connectors
- Removable terminal blocks
Digital I/O
- 2 or 4 channels depending on
model
- software selectable as inputs or outputs
- optical isolation
of 2000V rms
Digital Input
- Dry Contact : Logic 0 = open.
Logic 1= close to GND
- Wet Contact: Logic 0 = 0-3V, Logic
1= 10V-30V
Digital Output
- Open collector to 30V ( source,
sink or both )
- 200 mA max load
- Digital out ( DO ) or pulse mode
Relay
- Form C type SPDT
- Contact rating: 1A@30VDC, 0.5A @AC: 120VAC
- Breakdown
voltage: 500 VAC (50/60 Hz)
- Relay on time: 7 msec; Relay
off time: 3 msec.
- Total switching time: 10 msec.
- Insulation resistance:
1000 MW minimum at 500 VDC
Analog Input
- Channels: 2 or 4 differential
- 16-bit resolution
- lnput range: ±150 mV, ±500 mV, ±1 V,
±5 V, ±10 V,0-20 mA, 4-20 mA
- Optical Isolation : 3000 VDC
- Fault and overvoltage protection:
up to ±35 V
- Sampling rate: 10 samples/sec.
- Input impedance: 20 M Ohm
- Accuracy: ±0.1% or better
- Zero drift: ±5 µV/° C
- Span drift: ±25 ppm/° C
- CMR @ 50/60 Hz: 90 dB min
Thermocouple Input
- Types : J, K, T, E, R,
S, B
- Isolation voltage: 2000 VDC
- Sampling rate: 10 samples/sec.
- Accuracy: ±0.15% or better
- Zero drift: ±5 µV/° C, Span
drift: ±25 ppm/° C
- CMR @ 50/60 Hz: 130 dB
RTD ( Resistance Temperature Detector )
- Channels:
4 differential inputs
- lnput type: PT100, PT1000, Ni 518
- Optical Isolation: 2000
VDC
- Sampling rate: 10 samples/sec
- Accuracy: ±0.05% or better
- Zero drift: ±2.5 µV/° C, Span
drift: ±25 ppm/° C
- CMR @ 50/60 Hz: 130 dB
Protocols
IPV6, IPV4, TCP/IP, Reverse SSH, SSH, SSL, IPSec/IPv4,
IPSec/IPv6, CIDR, RIPV2/MD5,
ARP, RARP, UDP, UDP Multicast, ICMP, BOOTP, DHCP, TFTP,
SFTP, SNTP, Telnet, raw, reverse Telnet, MODBus/TCP, LPD, RCP,
DNS, WINS, HTTP, HTTPS, SMTP, SNMPV3, PPP, PAP/CHAP, SLIP,
CSLIP
Security and Authentication
- SSHV1 and SSHV2
- SSL V3.0/TLS V1.0, SSL V2.0
- SSL Server and SSL client mode capability
- IPSec: NAT Traversal, ESP authentication protocol
- Encryption: AES (256/192/128), 3DES, DES, Blowfish, CAST128, ARCFOUR(RC4), ARCTWO(RC2)
- Hashing Algorithms: MD5, SHA-1, RIPEMD160, SHA1-96, and MD5-96
- Key exchange: RSA, EDH-RSA, EDH-DSS, ADH
- X.509 Certificate verification: RSA, DSA
- Certificate authority (CA) list
- Local database
- RADIUS Authentication and Accounting
- TACACS+, LDAP, NIS, Kerberos
- RSA SecureID-agent or via RADIUS
- IP Address filtering
- Disable unused daemons
Management
- Web browser or secure web browser via https (SSL/TLS )
- Windows Server 2003/2008 MS - SAC : GUI access to text-based Special Administrative Console
- Perle DeviceManager software to manage single or multiple device servers
- CLI – Telnet, SSH, shared console port
- Menu
- SNMP, MIB II, Perle MIB, read and write capabilities
- SYSLOG
- Easy Configuration Wizard
- Failsafe mode - Default outputs if loss of communication occurs
- Port Buffering – 256k local, SYSLOG, NFS or 3DES encrypted to NFS server
- Set a personalized factory default for IOLANs
Serial Port
- Software selectable EIA/RS-232/422/485
- DB9M connector
- Full modem and hardware flow control on RS-232
- 50bps to 230Kbps for EIA-232
- up to 230Kbps for EIA-422/485
- Customizable baud rate support for unique speed requirements
- SUN Break Safe
- Full bidirectional modem support
- 15Kv ESD protection on all signals
- EIA 232 full duplex
- EIA 422 full duplex
- EIA 485 4 wire, full duplex
- EIA 485 2 wire, half duplex, with echo
- EIA 485 2 wire, half duplex, without echo
Indicators
- Power/Ready
- Network Link activity
- Serial: Transmit and Receive data LEDs
Dimensions, Weight
- Dimension (L x W x H): 12.7 x 9.2 x 4.5 (cm)
- Weight – 0.5 kg
Power
- 9-30V DC on terminal blocks.
- Optional AC adapters available from Perle (barrel connector will need to be removed)
- p/n 04030674 (USA), 04030671 (UK), 04030672 (EU)
TruePort: Fixed TTY/COM port emulation software.
- 32 bit Microsoft Windows Server 2008, Windows Server 2003, Vista , XP, 2000, NT
- 64 bit Microsoft Windows Server 2008, Windows Server 2003, Vista , XP
- Linux (32 / 64 Bit)
- Solaris Intel and SPARC ( 32 and 64 Bit )
- SCO UnixWare
- SCO OpenServer
- NCR
- HP UX including Itanium
- AIX
Environmental
- Operating temperature: -40°C to 74°C, -40°F
to 165°F
- Storage temperature: -40°C to 85°C, -40°F
to 185°F
- RoHS and WEEE Compliant
Approvals
- FCC Part 15A, CE, CAN/CSA 22.2, UL/CN 60950, EN 55022 Class A, EN 55024 Class A, CFR 47, ICES-003, IEC 60950-1
Warranty
- Limited lifetime warranty
Line Art
IOLAN SDS1 TD4 – 4 Digital I/O and 1 RS-232/422/485 Serial
Port

IOLAN SDS1 TD2R2 – 2 Digital I/O, 2 Relay outputs and 1
RS-232/422/485 Serial Port

IOLAN SDS1 TA4 – 4 Analog Inputs and 1 RS-232/422/485 Serial
Port

IOLAN SDS1 TT4 – 4 Thermocouple/RTD sensor inputs and 1
RS-232/422/485 Serial Port

IOLAN
SDS1 TA4R2 – 4 Analog inputs and 2 Relay Outputs and 1 RS-232/422/485
Serial Port

IOLAN SDS1 TA4D2 – 4 Analog inputs and 2 Digital I/O and
1 RS-232/422/485 Serial Port

|