|
|
|
Print 
PDFFuentes de alimentación Industrial
Fuente de alimentación Compacta de carril DIN
Disponible en modelos de 24 y 48 v DC, las fuentes de alimentación de grado industrial Perle están diseñadas para resistir entornos industriales rigurosos.
- Cumple con diversos estándares reconocidos por la industria para garantizar el máximo nivel de durabilidad y adaptabilidad en condiciones ambientales rigurosas
- Tamaño compacto con accesorio de carril DIN estándar
- Rango de entrada universal
- Protección contra cortocircuitos, sobrecargas y sobretensión
- Indicador LED para alimentación
Las fuentes de alimentación de grado industrial Perle están diseñadas para resistir a las temperaturas extremas, descargas eléctricas, vibraciones, y choques que se encuentran en las aplicaciones de automatización industrial, gubernamentales, militares, de petróleo y gas, mineras y exteriores.
Las fuentes de alimentación IDPS 24 v y 48 v DC están reforzadas para proporcionar una fiabilidad superior a temperaturas de funcionamiento extremas entre -20 y 70C.
Estas fuentes de alimentación son ideales para proporcionar una alimentación fiable a:
| IDPS-24-40-XT | IDPS-48-240-XT | UNO-PS/1AC/24DC/150W | TRIO-PS/1AC/48DC/10 | |
|---|---|---|---|---|
| Output | ||||
| Nominal DC Voltage | 24 V | 48 V | 24 V | 48 V |
| Max Current | 1.7 A | 5 A | 6.25 A | 10 A |
| Rated Power | 40.8 watts | 240 watts | 150 watts | 480 watts |
| Ripple and Noise | 150 mV p-p | < 40 mVPP | < 50 mVPP | |
| Adjustable Voltage Range | 24 - 30 V | 48 - 53 V | 24 - 28 V | 30 to 56 V DC |
| Load De-rating | De-rating from 60C | De-rating from 40C | 55 °C ... 70 °C (2.5%/K) | 55 °C ... 70 °C (2.5%/K) |
| 60% of full load at 70C | 60% of full load at 70C | |||
| Output Connectors | 4-pin terminal block ( V+,V-,V+,V- ) | 4-pin terminal block ( V+,V-,V+,V- ) | ||
| Input | ||||
| Input Voltage Range | 85 - 264VAC | 85 - 264VAC | ||
| 120 - 370VDC | ||||
| Frequency Range | 47 – 63Hz | 45 Hz - 65 Hz | ||
| Efficiency ( Typical ) | 88% | 85% | >94% | >91% |
| AC Current ( Typical ) | 1.1A/115VAC, | 2.8A/115VAC | 1.4 A/120 VAC | 4.6 A/120 VAC |
| 0.7A/230VAC | 1.4A/230VAC | 0.8 A/230 VAC | 2.4 A/230 VAC | |
| Inrush Current ( Typical ) | ||||
| 30A/115VAC | 27A/115VAC | < 50A ( typical ) | < 15A | |
| 60A/230VAC | 45A/230VAC | < 50A ( typical ) | < 15A | |
| Input Connectors | 3-pin terminal block | 3-pin terminal block | ||
| Protection | ||||
| Over Voltage | 31.2 - 36V | 54 – 60V | limited to approx. 60 V DC | |
| Environmental Specifications | ||||
| Operating Temperature Ranges | -20 to 70C ( -4 to 158F ) | -10 to 70C ( 14 to 158F ) | -25 °C to 70 °C (-13 to 158F ) | |
| Storage Temperature Range | -40 to 85C ( -40 to 185F ) | -20 to 85C ( -4 to 185F ) | -40 to 85C ( -40 to 185F ) | |
| Operating Humidity Range | 20 - 90% RH non-condensing | ≤ 95 % (at 25 °C, non-condensing) | 95 % (at 25 °C, non-condensing) | |
| Din Rail Mountable | Mounts to standard 35 mm DIN rail in accordance with DIN EN 60175 | Mounts to standard 35 mm DIN rail in accordance with DIN EN 60175 | ||
| MTBF | 301,700 hours based on MIL-HDBK-217F @ 25 C | 289,900 hours based on MIL-HDBK-217F @25 C | > 868000 h (40°C) (IEC 61709, SN 29500) |
> 500 000 h in acc. with IEC 61709 (SN 29500) |
| Product Weight and Dimensions | ||||
| Weight | 0.26kg, 0.57lbs | 1.12kg, 2.5lbs | 0.5 kg, 1.1lbs | 1.9 kg, 4.2lbs |
| Dimensions | 40 x 90 x 100mm, | 125.5 x 125.2 x 100mm | 37 x 130 x 125mm | 115 x 130 x 152.5mm |
| 1.57 x 3.54 x 3.94 inches | 4.94 x 4.93 x 3.94 inches | |||
| Packaging | ||||
| Shipping Weight | 0.29kg, 0.64lbs | 1.23kg, 2.7lbs | 0.6 Kg, 1.3lbs | 2.09 Kg, 4.6lbs |
| Shipping Dimensions | 45 x 105 x 110mm, 1.8 x 4.1, 4.3 inches | 145 x 145 x 125mm, 5.7 x 5.7x 4.9 inches | ||
| Standards and Certifications | ||||
| Safety | UL508, UL60950-1, TUV EN60950-1 | EN 60950-1/VDE 0805 (SELV) | EN 60950-1/VDE 0805 (SELV) | |
| Emissions | EN55011, EN55022 (CISPR22) | EN55011, EN55022 (CISPR22) | ||
| EN61204-3 , Class B EN61000-3-2,-3 | EN61204-3 , Class B EN61000-3-2,-3 | |||
| Mechanical Stability | Vibration: IEC 60068-2-6 | Vibration: IEC 60068-2-6 | ||
| EMC and Immunity | EN61000-4-2, 3, 4, 5, 6, 8, 11, EN55024, EN61000-6-2, EN61204-3, heavy industry level, criteria A | EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2 (EN50082-2), heavy industry level, criteria A | Conformance with EMC Directive 2014/30/EU EN 61000-6-2:2005 | |
| Industrial Safety | UL508 (Safety standard for Industrial Control Equipment ) | UL508 (Safety standard for Industrial Control Equipment ) | ||
| Class I, Div. 2 Group A, B, C, D HazardousLocations T4 approved | UL ANSI/ISA-12.12.01 Class I, Division 2, Groups A, B, C, D T4 (Hazardous Location) | |||
| Rail applications | EN 50121-4 | |||
| Environmental | Reach, RoHS and WEEE Compliant | Reach and RoHS Compliant | ||
| Other | EAR99 | EAR99 | ||
| HTSUS Number: 8517.62.0050 | HSTUS Number 8504.40.30 | |||
| 2 year warranty | 1 year warranty | |||